JL Cooper Fader Controls

Purpose

The JL Cooper Fader Controls device allows you to create a JL Cooper ES-8 100 device, JL Cooper Eclise MX device or a JL Cooper Eclipse MXL device.

Once the device is created, its control surface will resemble the physical appearance of the JL Cooper device. Furthermore, when you press a button on the control surface of the physical JL Cooper device, the corresponding button will toggle state on the control surface of the NWare device and vice versa.

The Raw Controls tab is designed to present the controls in a simple format and allow wiring from them to other devices in the design. This feature can be used to add custom functionality. For example, when a button in the Select column is pressed and held, the fader control could adjust a different setting rather than the channel gain, but when released, it would perform its normal function.

Notes:

• The mixer controls are designed to be wired to a DSP mixer device, as by default they will not actually perform any function.
• NWare is compatible with the TCP/IP version of the JL Cooper devices, as well as the RS-232 and RS-422 serial versions, but not the other variations.
• If you are using a serial connection, the JL Cooper device must be physically connected to a NioNode via the RS-232 or RS-422 port. If you use the NioNode RS-232 port, it must be configured so that console mode is disabled. For more information on console mode, see Specifying the function of the RS-232 serial port in the NION Hardware Manual.

For more information on the JL Cooper ES-8/100, see http://www.jlcooper.com/pages/es8100.html.

For more information on the JL Cooper Eclipse MX faderbox, see http://www.jlcooper.com/pages/eclipsemx.html.