|
|
|
Raw Controls |
Controls arranged in a simple format with LEDs next to each of the main buttons. |
Comms (serial) |
|
Comm port |
The comm port and serial protocol to use for data transfer. |
Rear Port |
The operating mode for a data port that supports more than one mode. For example, RS-422 or RS-485. |
Status |
Status message showing whether the device responded. |
Connected |
Lit (green) when a connection has been made to the device. |
Comms (TCP) |
|
IP address |
The IP address of the device you want to contact. This value can be edited. |
IP port |
The port number on which the device will listen for data transmissions from other devices. This setting must match the port number used by the transmitting device. The default is 0. The valid range is 0-65535. |
Status |
Status message showing whether the device responded. |
Connected |
Lit (green) when a connection has been made to the device. |
|
See also |