JL Cooper Eclipse 24

In this section

Purpose

The JL Cooper Eclipse 24 device presents a control surface that resembles the physical appearance of a JL Cooper Eclipse 24 desktop controller.

The Raw Controls tab is designed to present the controls in a simple format and allow wiring from them to other devices in the design. This feature can be used to add custom functionality.

Notes:

NWare is compatible with the TCP/IP version of the JL Cooper devices, as well as the RS-232 and RS-422 serial versions, but not the other variations.
If you are using a serial connection, the JL Cooper device must be physically connected to a NioNode via the RS-232 or RS-422 port. If you use the NioNode RS-232 port, it must be configured so that console mode is disabled. For more information on console mode, see Specifying the function of the RS-232 serial port in the NION Hardware Manual.

For information on the JL Cooper Eclipse 24, see http://www.jlcooper.com.