Topic: Control Modifier - Percentage
Here is a handy little device that was made a long, long time ago by someone else. It allows you to adjust the range of a control by percentages. It is pretty neat and very handy in the right situation.
From the "Help" inside the device:
-Control Modifier (Percentage)-
This device is to modify control values.
The percentage of the input is shown here. This represents the control connected to the input of this device.
This sets the minimum percentage to which the output is allowed to be set.
This sets the maximum percentage to which the output is allowed to be set.
This is the final value of the output. It is connected to the output via a Position Link so the relative position of this control is what is passed out to manipulate an external control.
Burnt Orange Studios