1

Topic: IR Control for DirecTV Receivers via Global Cache iTach IP2IR

This plugin will allow IR control of DirecTV receivers directly from within an NWare project file. This is done through the use of a Global Cache iTach IP2IR unit. This is essentially a networked IR server. They work really well and are easy to use. The concepts in this device can be used to create other IR controls, but you will need to use Global Cache's iLearn software to learn and change the IR codes that are being emitted.

From the Info block inside the plugin:

-DirecTV Receivers-
This device enables IR control of DirecTV Satellite Receivers through the use of a Global Cache iTach IP2IR.

1. Use the Global Cache utilities to set up the IP2IR on the network.
2. Place the IP address of the IP2IR in the gray "IP address" box above. If everything is correct, the green light will turn on.
3. Plug in the IR Emitters for the DirecTV Satellite Receivers to the IR ports on the IP2IR.

This device will support up to three receivers at once.

Post's attachments

Attachment icon DirecTV Receivers.npp 111.25 kb, 369 downloads since 2015-05-06 

Josh Millward
Burnt Orange Studios